Buy online or call us to place an order 888 223 3050
Dow Froth Pak 620 Class A fire rated spray foam insulation kits are portable two part polyurethane foam kits. FROTH-PAK™ spray polyurethane foam is a two-component, quickcure foam that fills cavities, cracks and expansion joints for insulation and air sealing. It is available in disposable kits for smaller jobs and refillable cylinders for applications that require a greater amount. FROTH-PAK™ Foam Insulation kits are well-known for insulating stud wall cavities up to 2" thick, cold floors above unheated areas, crawl space and attic walls, and ceilings when covered with a code-approved barrier. The kit can be restarted and reused for up to 30 days after initial startup. the kit yield up to 620 board feet of foam. One board foot is shown here:
Refer to your local building code or local inspector for proper application.
BEST IF USED DATE SEPTEMBER 2014
PLEASE CALL US ON 888-223-3050 IF YOU WOULD LIKE TO ORDER IN QUANTITY. TRUCK RATES FOR 5 OR MORE KITS ARE EXTREMELY FAVORABLE COMPARED TO UPS SMALL PACKAGE RATES
(Option of choosing a 30Ft Hose Assembly Kit)
- 15 feet of hose
(or 30 feet of hose)
- INSTA-FLO Gun Dispenser & Hose Assembly
- Cone Spray Anti-Crossover Nozzles ( 8 cone nozzles, 4 fan nozzles)
- 1 Wrench (5/8")
- 1 Petroleum Jelly Packet (5g)
- 1 Operation Instruction Manual
For a limited time, Great Stuff™ Work Wipes included!
Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Will skin over in 30 to 40 seconds and be completely cured in under 1 minute. Dow Froth Pak 620 is great for bigger jobs; yield is 620 board ft.(One board foot = 12"x12"x1"), 1.75 foam density.
FROTH-PAK™ Foam Insulation Kits (U.S. only)with a Class-A fire rating (flame spread index of 25 or less), FROTH-PAK™ Foam Insulation can be used in a variety of applications:
• Stud wall cavities
• Rim or band joists
• Crawl space walls and ceilings
• Attic ductwork
• Plumbing wall pipe insulation and support
Questions? - Call us at 888-223-3050
Froth Pak is a closed cell foam product and provides a very good moisture barrier.
Air infiltration accounts for 25%-40% of a home’s energy loss.
can fill the void.
IMPORTANT SAFETY & USE INFORMATION - FROTH PAK SPRAY FOAM KITS ARE INTEDNED FOR PROFESSIONAL USE - PLEASE ENSURE THAT YOU HAVE THE PROPER PERSONAL PROTECTION EQUIPMENT WHEN USING FROTH PAK FOAM KITS. PLEASE SEE THE VIDEO BELOW FOR MORE INFORMATION. We also stock Personal protection equipment needed for this application please see this link: Spray foam Personal Protection kit Gerson Organic Vapor Respirator, Head toe Tyvek coveralls, safety goggles and 12 pack nitrile gloves
**For information concerning the recently announced U.S. OSHA National Emphasis Program (NEP) for Occupational Exposure to Isocyanates Click Here**
**Some Additional Information from DOW about the NEP**
Sorry but we can not ship the product to Hawaii, Alaska or Puerto Rico as their are substantial handling and air freight charges for these materials.
Posted by Ged on 11th Oct 2013
Product was delivered 2 days after order was placed,exceptional. I used this to insulate a sub floor resting on a concrete base and theFoam-Pak 620 fullfilled this need. It was easy to use carfully following the instructions. I used up the entire contents in one go so cannot comment on storage and re-use. One down side is that it did no go as far as I expected. The 620 board feet (1.4 cu m)listed is theoretical in ideal lab conditions. I would like to know what the practical volume usage is.
Posted by Unknown on 1st Oct 2013
had a small problem with the left hose at the sprayer that seeped some material out. wasn't a big deal though. product sprays and covers well. make sure they are warm like the instructions explain or inconsistent coverage. warmed mine up and worked great. once applied, this product is amazing, like most any spray foam.
Posted by Unknown on 23rd Aug 2013
and besides that it is easy to use--you really have to plan what your doing so you don't have to change nozzles all the time
Posted by Unknown on 15th Mar 2013
I was satisfied with how the Froth-Pak went on. I initially heated the tanks up to 80 degrees and kept them around 75. I was able to do just under 500 square feet. Most spots at an inch thick while other places thicker. I applied it in on my basement walls behind a studded wall. One thing I will do differntly next time is use the "spot" tip to apply the foam behind the studs (~3/4" space) first and then go back through and use the fan tip to fill the spaces between each stud.
Posted by nnovboard.ru on 23rd Feb 2013