Everything in Stock! Visit Our Warehouse or Call Us at 1.888.223.3050
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Dow Froth Pak 650 Class A fire rated spray foam insulation kits are complete portable two part polyurethane spray foam systems. FROTH-PAK™ polyurethane foam is a two-component, quick cure, closed cell foam that fills cavities, cracks and expansion joints for insulation and air sealing. Air infiltration accounts for 25%-40% of a home’s energy loss, FROTH-PAK™ stops that energy loss. FROTH-PAK™ Foam Insulation kits can be used to insulate stud wall cavities up to 2" thick, cold floors above unheated areas, crawl spaces, attic walls, and ceilings when covered with a code-approved barrier. The kit can be restarted and reused for up to 30 days after first startup. The Froth Pak 650 kit yields up to 650 board feet of foam.
Dow Chemical has made enhancements to their industry leading formulation of FROTH-PAK™ Class A Insulation. As a direct result of these formulation enhancements, FROTH-PAK™ Class A Insulation now offers increased yield, improved adhesion and resistance to cold during transport and storage. With a yield improvement of 5% over the earlier formulation, FROTH-PAK™620 Insulation is now the FROTHPAK ™650.
One board foot is shown here:
- 15 feet hose (or optional 30 feet hose)
- INSTA-FLO Gun Dispenser & Hose Assembly
- Cone Spray Anti-Crossover Nozzles (8 cone nozzles, 4 fan nozzles)
- 1 Wrench (5/8")
- 1 Petroleum Jelly Packet (5 g)
- 1 Operation Instruction Manual
Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Foam will skin over in 30 to 40 seconds and be completely cured in under 1 minute. Dow Froth Pak 650 is great for bigger jobs; yield is 650 board ft.(One board foot = 12"x12"x1"), 1.75 foam density.
FROTH-PAK™ Foam Insulation Kits (U.S. only) come with a Class-A fire rating (flame spread index of 25 or less), FROTH-PAK™ Foam Insulation can be used in a variety of applications:
• Stud wall cavities
• Rim or band joists
• Crawl space walls and ceilings
• Attic ductwork
• Plumbing wall pipe insulation and support
Please refer to your local building code or local inspector for proper application.
Use by Date: If you have questions or concerns about the actual expiration date of the Froth-Pak you will receive, please call or e-mail us and we will gladly provide that information. All our Froth-Paks are fresh product, in sealed boxes, straight from Dow. We guarantee you the freshest product every time you order.
IMPORTANT SAFETY & USE INFORMATION - Froth Pak spray foam kits are intended for professional use - Please ensure that you have the proper personal protection equipment when using Froth Pak foam kits. Please see the Video below for more information.
Don't have Personal Protection Gear? Take a look at our Personal Protection Kit.
Additional charges may apply if shipping to a residence, extended service area, or business that does not have a loading dock.
Questions? - Call us at 888-223-3050
Posted by Ged on 11th Oct 2013
Product was delivered 2 days after order was placed,exceptional. I used this to insulate a sub floor resting on a concrete base and theFoam-Pak 620 fullfilled this need. It was easy to use carfully following the instructions. I used up the entire contents in one go so cannot comment on storage and re-use. One down side is that it did no go as far as I expected. The 620 board feet (1.4 cu m)listed is theoretical in ideal lab conditions. I would like to know what the practical volume usage is.
Posted by Unknown on 1st Oct 2013
had a small problem with the left hose at the sprayer that seeped some material out. wasn't a big deal though. product sprays and covers well. make sure they are warm like the instructions explain or inconsistent coverage. warmed mine up and worked great. once applied, this product is amazing, like most any spray foam.
Posted by Unknown on 23rd Aug 2013
and besides that it is easy to use--you really have to plan what your doing so you don't have to change nozzles all the time
Posted by Unknown on 15th Mar 2013
I was satisfied with how the Froth-Pak went on. I initially heated the tanks up to 80 degrees and kept them around 75. I was able to do just under 500 square feet. Most spots at an inch thick while other places thicker. I applied it in on my basement walls behind a studded wall. One thing I will do differntly next time is use the "spot" tip to apply the foam behind the studs (~3/4" space) first and then go back through and use the fan tip to fill the spaces between each stud.
Posted by nnovboard.ru on 23rd Feb 2013