Below are the available bulk discount rates for each individual item when you purchase a certain amount
WEATHERMATE™ Flashing is a crosslinked polymeric film facer with butyl rubber adhesive that creates a water resistant seal at window and door openings. It can be used together with Weathermate Sill Pan.
Weathermate is a self sealing, self-healing, fully adhered flashing engineered for exceptional adhesion to insulated sheathing, steel, masonry, concrete, gypsum and wood. It is used to protect the building superstructure from moisture intrusion at critical areas such as between joints of insulation on walls and as a temporary flashing over insulation joints on standing seam metal roofs, enhancing total building performance.
PLEASE SEE OUR BULK DISCOUNTS BY CLICKING "BUY IN BULK AND SAVE". PLEASE CALL US ON 888-223-3050 FOR BULK DISCOUNTS ON LARGER QUANTITIES
WEATHERMATE™ Flashing combines a BLUE™ high-density polyethylene (HDPE) film facer with a butyl rubber adhesive that forms a strong mechanical and chemical bond to most building materials. A polymeric-coated paper release liner provides a more consistent peel than plain paper liners.
WEATHERMATE™ Flashing contains no asphalt. The butyl rubber adhesive technology, a key component of this flashing, is considered superior to asphalt adhesives in compatibility with commonly used building envelope caulking materials, insulated and non-insulated sheathing, housewraps and window casing materials.
Click here to view Weathermate Straight Flashing Tech Bulletin
SIZES WEATHERMATE™ Flashing is available in 100' (30.5 m) rolls in widths of 4" and 6" (100 mm and 150 mm)
LIMITATIONS Minimum application temperature: 30°F (-1°C). WEATHERMATE™ Flashing may be left exposed to
sunlight up to 180 days.