PintyPlus Evolution Metallic Acrylic Spray Paint - Assorted Colors
PintyPlus Evolution Spray Paint is a quick drying, acrylic that gives you a smooth, uniform gloss finish on any type of surface. PintyPlus Evolution comes in a wide range of metallic colors that can stand up to outdoor use.
Ideal on wood, metal, stone, paper, cardboard and most plastics. PintyPlus Evolution quick drying formula is perfect for projects where time is a priority.
- Perfect for bicycles, skateboards, helmets, etc.
- Wide Range of Metallic Colors
- Faster Application, Gets in the Nooks and Crannies
- Better Coverage, as few as Two Coats
- Higher Yield, twice as much as Competitor Sprays
Performance 520cc/400ml = 21.5 sq. ft. (2 sq. m)
Surface dry in 10 minutes. Total drying time 15 minutes
Repaint with PintyPlus Evolution colors in 5 minutes.
PintyPlus is a product of Novasol Spray S.A., a leading European manufacture of aerosol paints and sprays. Novasol Spray is committed to providing the best in quality, human-friendly products with minimal environmental impact.
Looking for project ideas, tips and tricks? Check out www.pintyplus.com/usa
How to apply:
The surface to be painted should be clean, dry and free of any contaminants.
Shake the can vigorously for 1 minute. Spray from a distance of 10 inches and apply in rapid thin layers, first horizontally and then vertically. To achieve a uniform coverage and avoid drips, apply in several thin layers instead of a thick one.
When you're finished spraying, invert the can and push the nozzle until only gas comes out. This will prevent clogging.
Questions? - Call us at 888-223-3050
For greater adhesion and protection, first paint surface with Pintyplus Ferric Primer Spray or Pintyplus Universal Primer.
For maximum brightness, we recommend a coat of Pintyplus Universal Primer (allow to fully dry) before applying color.
If the surface to be painted is smooth, a light sanding will improve adhesion.
Remove any old loose paint with an appropriate paint stripper before painting.
Test prior to use on unseen area to insure compatibility.
Do not apply onto powered electrical equipment. Apply always in a well ventilated area.
Once empty, the aerosol should be disposed of according to local regulations.
This product hasn't received any reviews yet. Be the first to review this product!