PintyPlus Tech Ferric Primer Spray Paint - Assorted Colors
PintyPlus Tech Ferric Primer is a quick drying, alkyd primer with a matte finish. PintyPlus Ferric primer is chrome free and lead free.
Ideal on iron, steel, and surfaces to be protected from a harsh environment (damp, industrial, marine, etc.).
Performance 520cc/400ml = 15 sq. ft. (1.4 sq. m)
Drying time 1 hour
Repaint before 1 hour or after 24 hours
PintyPlus is a product of Novasol Spray S.A., a leading European manufacture of aerosol paints and sprays. Novasol Spray is committed to providing the best in quality, human-friendly products with minimal environmental impact.
Looking for project ideas, tips and tricks? Check out www.novasolsprayusa.com
How to apply:
The surface to be painted should be clean, dry and free of any contaminants. Clean rust and corrosion with a wire brush and remove any grease stains with solvent or compatible cleaner.
Shake the can vigorously for 1 minute. Spray from a distance of 10 inches and apply in rapid thin layers, first horizontally and then vertically. To achieve a uniform coverage and avoid drips, apply in several thin layers instead of a thick one.
When you're finished spraying, invert the can and push the nozzle until only gas comes out. This will prevent clogging.
Questions? - Call us at 888-223-3050
For colored finish repaint with Pintyplus Evolution Spray Paint.
If the surface to be painted is smooth, a light sanding will improve adhesion.
Remove any old loose paint with an appropriate paint stripper before painting.
Test prior to use on unseen area to insure compatibility.
Start and finish spraying outside the area being painted.
Do not apply onto powered electrical equipment. Apply always in a well ventilated area.
Once empty, the aerosol should be disposed of according to local regulations.