PintyPlus Water Base Evolution Acrylic Spray Paint - Assorted Colors

SKU:
NOV 720-MXP
Availability:
Same day shipping if ordered by 2 pm EST
Shipping:
Free Shipping
Write Review
$14.65

Description

PintyPlus Water Base Evolution Acrylic Spray Paint - Assorted Colors

PintyPlus Water Base Evolution Spray Paint is a water base acrylic that gives you a smooth, uniform finish on any type of surface. PintyPlus Evolution comes in a wide range of colors that are matched to the RAL color system, insuring consistent color from one can to another. PintyPlus Evolution is suitable for both indoor and outdoor use.

Suitable for All Surfaces, including Wood, MDF, Veneers, Glass, Clay, Ceramics, Paper, Natural Fibers, Rubber, Cork, Plastics, Textiles and Most Metals. PintyPlus Water Base Evolution Eco Friendly formula is perfect for projects where durability and consistent color is a priority.

  • Highly Durable Gloss Finish
  • Consistent Color Match with RAL Color System
  • Drying Time: 1 Hour, Repaint after 15 Minutes
  • Better Coverage, as few as Two Coats
  • Higher Yield, covers up to 22 square feet
  • Solvent Free, Environmentally Friendly Formula
  • Low Odor Level when Spraying
  • No Runs, Soap and Water Clean Up

Specifications:

Performance 520cc/400ml = 21.5 sq. ft. (2 sq. m)
Total drying time 1 Hour
Repaint with PintyPlus Evolution colors in 15 minutes.

PintyPlus is a product of Novasol Spray S.A., a leading European manufacture of aerosol paints and sprays. Novasol Spray is committed to providing the best in quality, human-friendly products with minimal environmental impact.

Looking for project ideas, tips and tricks? Check out www.pintyplus.com/usa

[[endtab]]

[[starttab]]

Application

How to apply:

The surface to be painted should be clean, dry and free of any contaminants.

Shake the can vigorously for 1 minute. Spray from a distance of 10 inches and apply in rapid thin layers, first horizontally and then vertically. To achieve a uniform coverage and avoid drips, apply in several thin layers instead of a thick one.

When you're finished spraying, invert the can and push the nozzle until only gas comes out. This will prevent clogging.

Questions? - Call us at 888-223-3050

[[endtab]]

[[starttab]]

Recomendations

Recommendations:

For greater adhesion and protection, first paint surface with Pintyplus Ferric Primer Spray or Pintyplus Universal Primer.

For maximum brightness, we recommend a coat of Pintyplus Universal Primer (allow to fully dry) before applying color.

If the surface to be painted is smooth, a light sanding will improve adhesion.

Remove any old loose paint with an appropriate paint stripper before painting.

Do not apply onto powered electrical equipment. Apply always in a well ventilated area.

Once empty, the aerosol should be disposed of according to local regulations.

[[endtab]]

0 Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!