Spray Foam Insulation Kit Dow FROTH-PAK™ 210 Class A Fire Rated
Dow FROTH-PAK™ 210 Class A fire rated spray foam insulation kits are complete portable two part polyurethane spray foam systems. FROTH-PAK™ polyurethane foam is a two-component, quick cure, closed cell foam that fills cavities, cracks and expansion joints for insulation and air sealing. Air infiltration accounts for 25%-40% of a home’s energy loss, FROTH-PAK™ stops that energy loss. FROTH-PAK™ Foam Insulation kits can be used to insulate stud wall cavities up to 2" thick, cold floors above unheated areas, crawl spaces, attic walls, and ceilings when covered with a code-approved barrier. The kit can be restarted and reused for up to 30 days after first startup. The FROTH-PAK™ 210 kit yields up to 210 board feet of foam.
The FROTH-PAK™ 210 kit yields up to 210 board feet of foam (One board foot = 12"x12"x1"), 1.75 foam density.
FROTH-PAK™ provides a R-6.6 rating per 1 inch of thickness when sprayed at 2 inches thick.
- Part A Tank - Isocyanate
- Part B Tank - Polyol
- INSTA-FLO Dispenser with 9 foot hose
- Cone Spray Anti-Crossover Nozzles (6 cone nozzles, 4 fan nozzles)
- 1 Petroleum Jelly Packet (5 g)
- 1 Operation Instruction Manual
Dow Chemical has made enhancements to their industry leading formulation of FROTH-PAK™ Class A Insulation. As a direct result of these formulation enhancements, FROTH-PAK™ 200 became the FROTH-PAK™ 210. FROTH-PAK™ Class A Insulation now offers increased yield, improved adhesion and resistance to cold during transport and storage.
Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Foam will skin over in 30 to 40 seconds and be completely cured in under 1 minute. Dow FROTH-PAK™ 210 is great for medium size jobs; yield is 210 board ft.
FROTH-PAK™ Foam Insulation Kits (U.S. only) come with a Class-A fire rating (flame spread index of 25 or less), FROTH-PAK™ Foam Insulation can be used in:
- Stud wall cavities
- Rim or band joists
- Crawl space walls and ceilings
- Attic ductwork
- Plumbing wall pipe insulation and support
Please refer to your local building code or local inspector for proper application.
Use by Date? - No worries. We guarantee you the freshest product every time you order.
Need a different size kit? Check out Froth Pak Disposable Kits for smaller jobs or the Froth Pak Refillable System when you need to go big.
Need more than 1 kit? Quantity discounts automatically apply. Need even more? Please call us at 888-223-3050 for quantity discounts and delivery information.
Safety & Use
Important Safety & Use Information
FROTH-PAK™ spray foam kits are intended for professional use - Please follow all instructions and guidelines for use and application.
Personal Protection Equipment should be used when applying FROTH-PAK™ foam kits.
Dow Personal Protection Equipment Recommendations
Dow Froth Pak Safe Handling Instructions
Don't have Personal Protection Gear? Take a look at our Personal Protection Kit.
FROTH-PAK™ Usage Recommendations
As with all chemical products proper preparation of the work area and application procedures should be followed to insure a safe and satisfactory job.
When spraying FROTH-PAK™, the initial reaction of the 2 chemicals will generate heat. We recommend building up thickness in a series of layers to avoid excessive heat buildup.
Proper ventilation of the work area should be followed. Please see Froth Pak Ventilation Guidelines.
Please make sure that both tanks are opened fully and that there are no restrictions in the feed lines. An improper mixture will cause "off ratio" foam. To see what this looks like check out our video "How to tell Good from Bad"
Signature Required at time of Delivery. Additional charges may apply if shipping to a residence, extended service area, or business that does not have a loading dock.
This product is also available for Pick Up from our Farmingdale, NJ warehouse.
Questions? - Call us at 888-223-3050