Bulk Discounts for FROTH-PAK™ 650, A Tank, B Tank, 30 ft Hose
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 2 - 5 and get $20.00 off
Buy 6 - 9 and get $60.00 off
Buy 10 or above and get $80.00 off
Product Description
Dow FROTH-PAK™ 650 with 30 ft Hose
Class A fire rated spray foam insulation kits are complete portable two part polyurethane spray foam systems. FROTH-PAK™ polyurethane foam is a two-component, quick cure, closed cell foam that fills cavities, cracks and expansion joints for insulation and air sealing. Air infiltration accounts for 25%-40% of a home’s energy loss, FROTH-PAK™ stops that energy loss. FROTH-PAK™ Foam Insulation kits can be used to insulate stud wall cavities up to 2" thick, cold floors above unheated areas, crawl spaces, attic walls, and ceilings when covered with a code-approved barrier. The kit can be restarted and reused for up to 30 days after first startup. The FROTH-PAK™ 650 kit yields up to 650 board feet of foam.
The FROTH-PAK™ 650 kit yields up to 650 board feet of foam (One board foot = 12"x12"x1"), 1.75 foam density.
FROTH-PAK™ provides a R-6.6 rating per 1 inch of thickness when sprayed at 2 inches thick.
Kit Includes:
Part A Tank(60 pounds) - Isocyanate
Part B Tank(60 pounds) - Polyol
30 feet hose
INSTA-FLO Gun Dispenser & Hose Assembly
Cone Spray Anti-Crossover Nozzles (8 cone nozzles, 4 fan nozzles)
1 Wrench (5/8")
1 Petroleum Jelly Packet (5 g)
1 Operation Instruction Manual
Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Foam will skin over in 30 to 40 seconds. Reentry to spray area can be made in 1 hour without respirator. Dow FROTH-PAK™ 650 is great for bigger jobs; yield is 650 board ft.
Applications
FROTH-PAK™ Foam Insulation Kits (U.S. only) come with a Class-A fire rating (flame spread index of 25 or less), FROTH-PAK™ Foam Insulation can be used in:
Stud wall cavities
Rim or band joists
Crawl space walls and ceilings
Attic ductwork
Plumbing wall pipe insulation and support
Please refer to your local building code or local inspector for proper application.
As with all chemical products proper preparation of the work area and application procedures should be followed to insure a safe and satisfactory job.
When spraying FROTH-PAK™, the initial reaction of the 2 chemicals will generate heat. We recommend building up thickness in a series of layers to avoid excessive heat buildup.
Please make sure that both tanks are opened fully and that there are no restrictions in the feed lines. An improper mixture will cause "off ratio" foam. To see what this looks like check out our video "How to tell Good from Bad"
Additional charges may apply if shipping to a residence, extended service area, or business that does not have a loading dock. This product is also available for Pick Up from our Farmingdale, NJ warehouse.