• AWF PRO Thickened Epoxy
• High Strength, Gap-Filling Adhesive – Delivers reliable structural bonding, sealing, and filleting.
• No Sagging or Running – Thickened formula stays in place on vertical and overhead surfaces.
• Extended Working Time – 40-minute open time at 72°F allows precision and flexibility.
• Versatile Bonding – Adheres to wood, fiberglass, metal, concrete, composites, masonry, and more.
• Superior Coverage – 450 mL cartridge offers over 2x material compared to 10 oz cartridges.
• 100% Waterproof Seal – Forms watertight, durable bonds resistant to stress and impact.
• Post-Cure Workability – Can be drilled, sanded, and painted for a clean finish.
• Wide Compatibility – Fits most 450 mL and 600 mL dual-cartridge epoxy applicators.
• AWF 2500 Dual Epoxy Gun (25:1 Thrust)
• High Thrust Ratio (25:1) – Provides smooth, controlled dispensing of thick adhesives.
• Heavy-Duty Steel Construction – Built for durability and long-term professional use.
• Ergonomic Grip – Reduces fatigue during extended application.
• Precision Control – Ideal for high-viscosity, thickened epoxies and sealants.
• Universal Fit – Compatible with standard 450 mL and 600 mL dual cartridges.

• Application Temperature: 50°F to 90°F
• Working Time (in static mixer): 40 minutes (@ 72°F)
• Cure to Solid: 5–6 hours (@ 72°F)
• Clamp Time: 24 hours
• Cure to Working Strength: 2–5 days (@ 72°F)
• Full Cure: 5–7 days (temperature/mass dependent)

Physical Properties:

• Specific Gravity: 1.09 (ASTM D 792)
• Compressive Strength: 9,800 psi (ASTM D 695)

Note: Cure rate varies with ambient temperature, substrate temperature, and applied volume.

• Bonding and laminating wood, fiberglass, composites, and metals.
• Filling gaps, cracks, and voids in masonry and concrete.
• Creating fillets and reinforcing joints and corners.
• Vertical and overhead sealing where sag resistance is critical.
• Adhesion on difficult woods (teak, oily hardwoods).

Surface Preparation

• Clean, dry surfaces thoroughly.
• Remove oil, grease, dust, and loose material.
• Roughen smooth surfaces for best adhesion.

Cartridge Setup

• Insert 450 mL dual-cartridge into the AWF 2500 Dual Epoxy Gun.
• Attach static mixer nozzle.
• Dispense a small amount until a uniform color is achieved.

Application

• Apply epoxy directly to the substrate.
• For vertical or overhead use, work in sections for control.
• Fill seams, cracks, or joints evenly.

Working & Cure

• Working time: ~40 minutes at 72°F.
• Initial cure: 5–6 hours.
• Clamp time: 24 hours.
• Full strength: 2–5 days (depending on conditions).

Post-Cure Options

• Once cured, epoxy can be drilled, sanded, and painted.