• Minimal Expansion – Expands only as needed to fill cracks and voids without distorting surfaces.
• Fast Installation – Tack-free in under 20 minutes; trims in about 30 minutes for fast project turnaround.
• Flexible & Durable Seal – Maintains elasticity during structural movement to prevent cracking or separation.
• Water-Resistant Foam Skin – Helps protect wood substrates and reduce moisture intrusion.
• Strong Adhesion – Bonds to wood, brick, concrete, foam board, drywall, and most plastics.
• Pro-Grade Dispensing – Works with adjustable-flow dispensing guns; 30-day restartability.
• Improves Building Performance – Reduces air leakage, drywall pops, and insect pathways.

Thermal Performance

• Thermal Resistance: R-0.26 per inch @ 75°F (ASTM C518)

Dimensional Stability (ASTM D2126)

• 14.31% at 100°F / 100% RH (2 weeks)
• 0.41% at −40°F / ambient RH (2 weeks)

Strength Properties

• Flexural Strength: 8.8 psi (ASTM C203)
• Compressive Strength: 9.3 psi (ASTM D1621)
• Tensile Strength: 14.4 psi (ASTM D1623)
• Core Density: 1.01 pcf (ASTM D1622)

Water Absorption

• 6.4% per volume (ASTM D2842)

Closed Cell Content

• 0.8 (ASTM D2856)

Shelf Life

• 1 year at 75°F

Enerfoam™ is intended for:

• Adhering insulated concrete forms (ICFs)
• Bonding architectural foam
• Bonding drywall
• Sealing pipe penetrations
• Filling small cracks and voids in building envelopes

Surface Prep

• Surfaces must be clean & free of dust, oils, and loose materials.
• Damp surfaces do not impair adhesion.

Usage Instructions

• Use between 32°F–100°F.
• Shake vigorously before dispensing.
• Apply with a professional dispensing gun.
• Foam requires exposure to atmospheric moisture to fully cure.