• AWF 1000 – Basic, Lightweight PTFE-Coated Gun
  • PTFE Non-Stick Coated Adapter Basket
  • Professional control and lightweight build
  • Ideal for general sealing jobs
• AWF 1400 – Mid-Tier Gun with Enhanced Build
  • Smooth trigger action and snug fittings for consistent flow
  • Barbed extender tips and control knob for foam bead adjustment
  • Durable and easy to clean
  • Great all-around performer
• AWF 1500 – Heavy-Duty Convertible Gun
  • Convertible for use with both pro-size cans and cylinder tanks
  • PTFE-coated dispensing needle & adapter basket
  • Built to withstand demanding job sites
  • Includes Allen wrench and brass adapter for tank conversion
• AWF 1200 – Long Reach 2' Foam Gun
  • Extended 2-foot barrel reaches hard-to-access areas
  • PTFE coating, adjustable flow control, and ergonomic grip
  • Ideal for deep cavities, overhead work, and HVAC sealing

• Fast Grab Tack: Tack-free in as little as 14 minutes for efficient project progress.
• High Yield Efficiency: One 26.5 oz (751 g) can equals up to 16 quart tubes of traditional adhesive.
• Weather Versatility: Performs in dry, damp, or frozen conditions, and from 32°F to 100°F (0°C to 38°C).
• 30-Day Restartability: Reusable when attached to a PRO Series gun for up to 30 days.
• Strong Bonding Power: Reduces nail pops, squeaks, and the need for mechanical fasteners.
• Multi-Surface Compatibility: Adheres to wood, metal, concrete, masonry, drywall, foam, and plastics.
• All-Weather Formulation: Stable under freeze-thaw cycles, suitable for cold climates.

• Subfloor assembly (plywood or OSB to joists)
• Drywall attachment to wood framing
• Foam panel and insulation board installation
• Structural insulated panel (SIP) and insulated concrete form (ICF) bonding
• Paneling and sheathing attachment
• General construction repairs and gap sealing

Common Substrates

• Wood (dry, treated, damp, or frozen)
• Plywood, OSB
• Concrete and masonry
• Drywall
• Foam insulation panels
• Metal, glass, and most plastics

Surface Preparation

• Ensure all substrates are clean, sound, and free of loose materials like dirt, grease, oil, or standing water.
• Painted or coated surfaces should be sanded or roughened.
• Dry fit materials before adhesive application.

Application Method

• Shake can vigorously for at least 1 minute before use.
• Attach to a PRO Series dispensing gun (e.g., PRO 14 or PRO 14XL).
• Adjust the flow control knob to desired bead size (typically 1/2”).
• Apply in continuous zigzag or parallel beads to ensure full coverage.
• Join materials within 10 minutes of adhesive application; press firmly into place.
• If bead skins over, remove and reapply fresh adhesive.

Curing

• Initial bond in ~2 hours; full cure in 7 days depending on humidity and temperature.
• High humidity accelerates cure time.

Cleanup

• Wipe away uncured adhesive with dry cloth or scraper.
• Cured foam must be mechanically removed.
• Store the can upright attached to gun when not in use.