• AWF 1000 – Basic, Lightweight PTFE-Coated Gun
  - PTFE Non-Stick Coated Adapter Basket
  - Professional control and lightweight build
  - Ideal for general sealing jobs
• AWF 1400 – Mid-Tier Gun with Enhanced Build
  - Smooth trigger action and snug fittings for consistent flow
  - Barbed extender tips and control knob for foam bead adjustment
  - Durable and easy to clean
  - Great all-around performer
• AWF 1500 – Heavy-Duty Convertible Gun
  - Convertible for use with both pro-size cans and cylinder tanks
  - PTFE-coated dispensing needle & adapter basket
  - Built to withstand demanding jobsites
  - Includes Allen wrench and brass adapter for tank conversion
• AWF 1200 – Long Reach 2' Foam Gun
  - Extended 2-foot barrel reaches hard-to-access areas
  - PTFE coating, adjustable flow control, and ergonomic grip
  - Ideal for deep cavities, overhead work, and HVAC sealing

• Minimal Expansion & Low Pressure: Won’t bow or distort window or door frames when properly applied
• Soft & Flexible: Remains pliable after curing—accommodates seasonal joint movement
• Fast Setting Time: Tack-free in 3–10 minutes, trimmable within 1 hour, fully cured in 8–12 hours
• Superior Seal: Creates a long-lasting, airtight and water-resistant bond
• Reusable System: PRO cans can be reused for up to 30 days with the applicator gun
• Cleaner Compatibility: Great Stuff™ Foam Cleaner simplifies gun and nozzle maintenance
• Enhanced Precision: Applicator gun provides adjustable bead control with no-drip functionality
• Compliant & Certified:
  • UL Classified (UL 723)
  • ASTM E2112 compliant
  • AAMA 812-04 low-pressure certification
  • CCMC 13074-L listed in Canada
• Paintable & Stainable: After full cure
• Bright Yellow Color: Easy visibility during application
• Outperforms: Fiberglass or caulk in air sealing performance

• Tack-Free Time: 3–10 minutes
• Trim Time: ~1 hour
• Full Cure: 8–12 hours (temperature & humidity dependent)
• Service Temperature: Up to 240°F (116°C)
• Application Temperature: 40°F to 100°F (4°C to 38°C), RH > 20%
• UL Rating: UL 723 – Flame Spread 10 / Smoke 20
• Air Leakage: < 0.01 cfm/ft² @ 6.24 psf (ASTM E283)
• Water Penetration: No leakage at 12 psf (ASTM E331)
• Open Cell Content: <75%
• Reusability: Up to 30 days when can remains attached to gun
• Estimated Yield: 8–11 standard windows per 20 oz can (36" x 60", 3/8" gap)

• Window frame and rough opening gaps
• Door frame and rough opening seals
• Replacement or new construction weatherproofing
• Energy-efficiency upgrades in residential and commercial buildings
• Indoor sealing projects requiring flexible, minimal-expansion foam

Common Substrates:

• Vinyl window and door frames
• Wood frames and framing
• Aluminum and metal surfaces
• OSB and plywood sheathing
• Concrete and masonry (with proper priming)

Note: Surfaces should be clean, dry, and free from dust, oil, or release agents for optimal adhesion.

• Prep Area:
  • Ensure surfaces are clean and dry
  • Shake can vigorously for 60 seconds before use
• Attach Can to Gun:
  • Screw the can onto the gun (do not overtighten)
  • Open the valve on the back of the gun to begin use
• Apply Foam:
  • Gently pull the trigger to dispense foam
  • Fill gaps approximately 1/3 full—foam will expand
  • Adjust bead size using the flow control knob
• Curing:
  • Tack-free in 3–10 minutes
  • Trimmable within 60 minutes
  • Fully cured in 8–12 hours at 70°F / 50% RH
• After Use:
  • Close the gun’s valve to preserve can pressure for up to 30 days
  • Wipe external parts with GREAT STUFF™ Foam Cleaner for daily cleaning
  • For long-term storage, remove can and flush gun internally using cleaner
• Storage:
  • Store upright in a cool, dry place
  • Do not expose cans to temperatures above 120°F (49°C)
• Safety Tips:
  • Use in a well-ventilated area
  • Wear gloves, long sleeves, and safety glasses
  • Keep away from open flames and ignition sources
  • Do not use in enclosed or non-ventilated voids