About this item

• With our 450 mL cartridge, we give you over 2x more product, compared to the top 10oz (295 mL) cartridges on the market, AWF PRO 2-Part Thickened Epoxy is your go-to solution for bonding, gluing, filling, and sealing projects.
• Ideal for overhead and vertical applications, stays precisely where you apply it without running
• Achieve high-performance bonds on a wide array of materials including wood, metals, fiberglass, composites, masonry, brick, concrete, glass, slate, and tile.
• User-friendly working time of 40 minutes at 72°F allows for a precise application before setting.
• Once cured, provides a 100% waterproof seal that can be readily drilled, sanded, and painted to seamlessly integrate with your project
• Compatible with most 450mL and 600mL dual cartridge applicators

Handling Properties

Application Temperature        50°F to 90°F

Working Time (in static mixer)             40 minutes (@ 72°F)

Cure to Solid  5 to 6 hours (@ 72°F)

Clamp Time    24 hours

Cure to Working Strength       2 to 5 days (@ 72°F)

Cure Procedure            Cure rates are dictated by the ambient temperature, the temperature of the substrate, and the mass of epoxy that was applied. Full cure is roughly 5-7 days. Warmer conditions will shorten these cure times, while cooler conditions will extend them.

Physical Properties

Specific Gravity             1.09 (ASTM D 792)

Compressive Strength             9,800 psi (ASTM D 695)

Tensile Strength            6,540 psi (ASTM D 638)

Tensile Modulus           165,000 psi (ASTM D 638)

Tensile Elongation % 4.3% (ASTM D 638)

Flexural Strength          11,600 psi (ASTM D 790)

Flexural Modulus         360,000 psi (ASTM D 790)

Hardness, Short D (@ 72°F) 86 (ASTM D 2240)

Tg DSC Ultimate           145°F (ASTM E 1356)