• Low Odor: Safe for use in occupied buildings and “neighbor friendly” projects.
• Quick Turnaround: Traffic ready in 24 hours (vehicles) and 12 hours (foot).
• Durability: Provides a hard, abrasion-resistant surface.
• Reduced System Complexity: Requires fewer coats compared to older systems.
• Compatibility: Designed to work seamlessly with Vulkem 360 NF or Vulkem 350 basecoats.
• Color Options: Gray, Slate Gray, Beige; other colors available by special order.
• Chemical & Salt Resistance: Resists oils, antifreeze, gasoline, and deicing salts.

• Tensile Strength (ASTM D-412): 4200 psi
• Elongation (ASTM D-412): 100%
• Hardness (ASTM C-661): 75 Shore D
• Viscosity (Brookfield HBT): ~2000 cps
• Cure Time (ASTM D-1640): 24 hrs, traffic ready
• Solids Content (ASTM C-792): 99+%
• Crack Bridging (ASTM D-412): 1/8”
• Abrasion Resistance: 100,000 cycles @ 120 psi
• Peel Strength to Basecoat (ASTM C-794): 100% cohesive failure

• Intermediate coat in heavy-duty vehicular traffic deck systems
• Topcoat for interior applications where odor control and durability are important
• Pedestrian systems: plaza decks, balconies, pool/recreation decks, plywood decks, mechanical rooms, stadium walkways
• Vehicular systems (when paired with Vulkem 951 NF): parking stalls, ramps, drive lanes, loading docks
• Waterproofing protection for occupied areas beneath concrete slabs

• Concrete (14–28 day cured, clean and prepared)
• Plywood decks
• Wood or metal (with proper priming and Vulkem 360 NF/350 basecoat)

Basecoat Requirement: Vulkem® 360 NF or Vulkem® 350.

Medium Duty System:

• 25 mils Vulkem® 360 NF basecoat
• 12 mils Vulkem® 950 NF (with backrolled aggregate)

Heavy Duty System:

• 25 mils Vulkem® 360 NF basecoat
• Vulkem® 950 NF as intermediate coat
• Vulkem® 951 NF as exterior topcoat

Surface Preparation: Concrete must cure at least 14 days (28 preferred). Surfaces must be dry, clean, and contaminant-free. Mechanical or chemical prep may be needed.

Curing: 12 hrs before foot traffic, 24 hrs before vehicular traffic.