Secure rigid and semi-rigid insulation to masonry substrates with TRUFAST®'s Plasti-Grip® PMF Anchor. Engineered with a 2-3/8ʺ diameter washer head and a polypropylene plastic shank, this fastener ensures a tight hold without the need for screws, pins, or adhesives. Ideal for concrete, brick, block, and stone applications, it offers a clean, flush finish while minimizing thermal bridging for energy-efficient performance.
Features & Benefits
- Versatile Use: Permanently attaches all types of rigid insulation to masonry, concrete, block, brick, or stone.
- No Screws or Adhesives Needed: Simple drill-and-hammer installation without extra hardware.
- Thermal Efficiency: Solid plastic shank reduces thermal-bridging.
- Textured Washer Head: Enhances adhesion for basecoats in EIFS applications.
- Durable Construction: Made from tough polypropylene for long-lasting performance.
- Flush Finish: 2-3/8ʺ diameter head sits flush against the surface for a smooth installation.
Installation Guidelines
- Pre-drill with a 5/16" masonry bit.
- Ensure hole is deeper than anchor length and cleared of debris.
- Tap PMF anchor into place with a hammer until flush with the insulation surface.
- For best results, use a sharp masonry bit and a high-quality hammer drill to prevent hole enlargement and maintain pull-out resistance.
Application Details
- Substrate Compatibility: Concrete, masonry, brick, block, stone
- Insulation Types: Rigid and semi-rigid insulation
- Insulation Thickness Range: 1/2ʺ to 5ʺ
- Anchor Head Diameter: 2-3/8ʺ
- Material: Polypropylene plastic
- Typical Uses: EIFS systems, insulation board attachment
Product Options
| Part No. |
Anchor Length |
Insulation Thickness Range |
Package Qty |
Package Weight |
| PMF-2000 |
2ʺ |
1/2ʺ – 3/4ʺ |
250 |
4 lbs |
| PMF-2750 |
2-3/4ʺ |
1ʺ – 1-1/2ʺ |
250 |
5 lbs |
| PMF-3500 |
3-1/2ʺ |
1-1/2ʺ – 2ʺ |
250 |
6 lbs |
| PMF-4500 |
4-1/2ʺ |
2-1/2ʺ – 3ʺ |
250 |
6 lbs |
| PMF-5375 |
5-3/8ʺ |
3-1/2ʺ – 4ʺ |
200 |
8 lbs |
| PMF-6250 |
6-1/4ʺ |
4-1/4ʺ – 5ʺ |
200 |
5.6 lbs |
