• Lasting Hold – Maintains excellent adhesion and flexibility with resistance to UV, weather, and aging.
• Environmentally Conscious – Extremely low VOC and free of solvents and isocyanates, ensuring minimal odor and safer handling.
• Advanced Technology – Hybrid polymer chemistry delivers both adhesive and sealant performance in one product, effective across a wide temperature range.
• Instant Grab Strength – Reduces installation steps and labor costs by holding materials in place without additional fasteners.
• Flexible Movement Capability – Accommodates ±25% joint movement without cracking or adhesion loss.
• Versatile Adhesion – Primerless adhesion to most porous and non-porous substrates, including metal, wood, plastics, and foam.
• Multi-Use Applications – Ideal for modular construction, vehicles, cargo trailers, HVAC units, marine, and below-grade waterproofing systems.
• Low Odor, Low VOC – Safe for enclosed or occupied spaces; compliant with strict environmental standards.
• Paintable – Compatible with most latex and oil-based paints once cured (testing recommended for dynamic joints).

TREMPRO™ Chem-X Pro® delivers multi-purpose adhesion and sealing performance for both interior and exterior environments. Its strong green strength and flexibility make it ideal for demanding structural and assembly applications, including:

• Manufacturing of: Vehicles, semi-trailers, RVs, and cargo trailers; HVAC units, solar panels, and steel tanks; boats, railcars, and modular construction systems.
• Building Envelope Uses: Insulation-to-air barrier connections, below-grade membranes and drainage boards, metal-to-metal and composite bonding.

• Aluminum, galvanized steel, stainless steel
• Painted and powder-coated metals
• Plastics (PVC, ABS, FRP)
• Wood and plywood
• Foam board insulation
• Concrete, masonry, drywall
• Glass and fiberglass
• Vinyl and coated panels

Note: Always perform adhesion testing on project-specific substrates prior to large-scale use.

• Surface Preparation – Ensure all surfaces are clean, dry, and free of oil, grease, dust, or contaminants. Avoid alcohol or xylene-based cleaners immediately before application.
• Application – Apply using a standard caulking gun or pressure equipment. Do not apply below 41°F (5°C) or above 95°F (35°C).
• Tooling – Tool the bead within the skin-time window for best results. Avoid alcohol-based tooling agents.
• Cure Time – Skins over in ~20–25 minutes; full cure depends on temperature, humidity, and joint depth.
• Paintability – Paint after 24 hours (or 3 days for rigid paints). For dynamic joints, use flexible coatings.

Before cure, clean tools and equipment with suitable solvents or scrape excess material. Once cured, removal requires mechanical abrasion or cutting.