• Reduces Rapid Surface Moisture Loss: Forms a temporary monomolecular film that helps retain moisture on fresh concrete during finishing.
• Helps Prevent Plastic Shrinkage Cracking: Minimizes the risk of early-age cracking caused by excessive evaporation.
• Improves Finishing Conditions: Helps eliminate surface crusting, allowing for smoother, more consistent finishing.
• Water-Based Formula: Fully compatible with fresh concrete and easy to dilute before application.
• Ideal for Hot Weather Placement: Performs exceptionally well in direct sunlight, high temperatures, low humidity, and windy conditions.
• Compatible with Modern Concrete Mixes: Suitable for silica fume, microsilica, and other low-bleed concrete designs.
• Will Not Affect Surface Treatments: Does not interfere with the adhesion of curing compounds, sealers, or other post-treatment products.
• Economical Concentrate: Dilutes at a 9:1 water-to-product ratio for excellent coverage and value.
• Interior & Exterior Use: Suitable for commercial, industrial, and residential concrete applications.

• Concrete Floors
• Slabs-on-Grade
• Pavements
• Parking Decks & Ramps
• Concrete Toppings
• Dry Shake Hardened Floors
• Specialty Iron Toppings
• Vertical Concrete Repairs
• Overhead Concrete Repairs
• Commercial & Industrial Concrete Projects
• Residential Flatwork

Surface Preparation

No surface preparation is required. Apply directly to freshly placed concrete immediately after floating.

Mixing

• Supplied as a concentrate and must be diluted before use.
• Mix 9 parts clean water with 1 part EUCOBAR.
• Thoroughly shake or mix before application.

Application

• Apply using a hand-pump or tank sprayer capable of producing a fine mist.
• Spray a light, even coat immediately after floating.
• A light pink, translucent sheen indicates proper coverage.
• In hot, windy, or low-humidity conditions, apply additional light coats as needed.
• For dry shake hardener installations, apply before and between shake applications.

Important Notes

• Not intended for use as a curing compound.
• Not a surface retarder for exposed aggregate finishes.
• Do not work the material into the concrete surface.
• Apply only as a fine mist.
• Protect product from freezing.
• Always follow industry-approved curing practices after finishing.