• Single-Coat Traffic Coating System: Achieves a complete 45 mil waterproof traffic coating system in one application, reducing labor time and simplifying installation.
• Integral Textured Finish: Built-in texture helps provide enhanced durability and improved slip resistance without separate aggregate broadcasting.
• UV Resistant Aliphatic Technology: Full aliphatic polyurethane system delivers long-term color stability and weather resistance for exposed exterior applications.
• Fast Return to Service: Fast-curing formula allows reopening to vehicular traffic in approximately 36 hours under normal conditions.
• Excellent Abrasion & Wear Resistance: Designed to withstand heavy vehicular and pedestrian traffic in demanding commercial and industrial environments.
• Seamless Waterproof Protection: Creates a monolithic waterproof membrane that helps protect concrete decks and elevated surfaces from water intrusion.
• Resistant to Deicing Salts: Helps protect coated surfaces from seasonal salt exposure and harsh environmental conditions.
• Flexible Elastomeric Performance: Accommodates normal substrate movement, thermal expansion, and contraction while maintaining waterproof integrity.
• Professional-Grade Durability: Suitable for parking structures, rooftop decks, stadiums, ramps, and pedestrian traffic areas.

• Multi-Story Parking Garages
• Parking Decks & Ramps
• Rooftop Decks
• Plaza Decks
• Foot Bridges & Walkways
• Stadiums & Arenas
• Mechanical Rooms
• Commercial Traffic Decks
• Pedestrian Walkways
• Exterior Waterproofing Traffic Surfaces

Sikalastic®-720 One Shot is designed for professional application over properly prepared concrete, plywood, metal, and approved existing coating systems.

Substrates must be clean, dry, sound, and mechanically prepared to achieve an open surface profile prior to installation. Primer selection varies based on substrate type and moisture conditions.

Mixing Instructions:

Mix using a low-speed mechanical mixer by combining Part A, aggregate component Part C, and Part B until a uniform consistency is achieved.

Application Method:

Immediately pour mixed material onto the substrate and apply using a 3/8" V-notched squeegee followed by backrolling to achieve the proper film thickness and uniform texture.

Best Practices:

• Apply only to dry, frost-free surfaces
• Do not apply if rain is expected within 6–12 hours
• Maintain substrate temperatures between 40°F and 95°F
• Ensure substrate temperature remains at least 5°F above dew point
• Allow coating to cure a minimum of 36 hours before vehicular traffic exposure