• Cures & Seals in One Step: Promotes proper cement hydration while simultaneously protecting the concrete surface.
• Non-Yellowing Formula: UV-resistant acrylic resin maintains a clear, attractive finish without yellowing over time.
• High-Gloss Decorative Finish: Deepens concrete color and enhances the appearance of decorative concrete surfaces.
• Improves Concrete Strength Development: Functions as an ASTM-compliant curing compound to support proper concrete curing.
• Protects Against Moisture & Surface Wear: Forms a durable protective membrane that helps extend concrete life.
• Excellent for Decorative Concrete: Ideal for stamped, colored, exposed aggregate, and architectural concrete applications.
• Tintable for Color Uniformity: Compatible with Euclid Universal Color Packs to reduce color variation and create decorative effects.
• Suitable for New & Existing Concrete: Works as both a curing compound for freshly placed concrete and a protective sealer for existing surfaces.
• Fast Drying Formula: Dries to the touch in less than one hour, with light foot traffic possible in as little as 2–4 hours.
• Professional Grade Performance: Meets ASTM C1315, ASTM C309, and AASHTO M148 specifications for curing and sealing compounds.

• New concrete curing and sealing
• Existing concrete resealing
• Decorative stamped concrete
• Colored concrete
• Exposed aggregate concrete
• Driveways
• Sidewalks
• Exterior pavements
• Patios
• Walls and columns
• Dry shake floors
• Residential, commercial, and industrial concrete surfaces

Surface Preparation

Ensure concrete surfaces are clean, dry, and free of dirt, oil, curing residue, and standing water. For freshly placed concrete, allow all bleed water to evaporate and verify the surface is firm enough to prevent marring before application.

Application

• No mixing is required before use.
• Apply evenly using a solvent-resistant pump sprayer equipped with a high-solids nozzle.
• Lightly back-roll after spraying to create a uniform finish and eliminate lap marks.
• May also be applied by roller while maintaining the recommended coverage rate.
• Maintain a continuous wet edge throughout the application.
• Redistribute puddles or heavy areas before the material begins to dry.

Environmental Conditions

• Apply when surface and ambient temperatures are between 40°F and 90°F (4°C to 32°C).
• Protect newly sealed surfaces from rain or heavy fog for at least 12 hours after application.

Best Practices

• Avoid excessive film build or multiple heavy coats.
• Over-application may cause bubbling, whitening, peeling, or reduced performance.
• Follow recommended coverage rates to achieve the best appearance and long-term protection.