Great Stuff Pro

Great Stuff Pro™ Window & Door (Low Expansion), 20oz Pro Can, Full Case (12 Cans)

Great Stuff Pro™ Window & Door (Low Expansion), 20oz Pro Can, Full Case (12 Cans)

$163.79

Bulk discount rates

  • Buy 2 - 5 get 3% off
  • Buy 6 - 10 get 5% off
  • Buy 11+ get 7% off
  • SKU: DOW 00187273-CS
  • Shipping: Free Shipping
In Stock & Ready To Ship!
Current Stock:Only left:
Description

Description

A one-component, minimal-expanding, low-pressure polyurethane foam designed specifically to seal gaps around window and door frames without bowing or distorting them. Once cured, it provides a flexible, airtight, and water-resistant seal suitable for vinyl, wood, and metal substrates.

Features & Benefits

  • Minimal Expansion / Low Pressure Build: Meets AAMA 812; designed not to distort frames.
  • Flexible & Durable Seal: Maintains integrity across temperature fluctuations.
  • Airtight & Water-Resistant: Forms a resilient barrier against air and moisture, sustainably improves energy efficiency.
  • Reusable: Great Stuff PRO remains reusable on a PRO dispensing gun for up to 30 days if properly sealed.
  • Finish Friendly: Paintable, sandable, and stainable after cure.
  • UL Classified & Code Tested: Approved to UL 723 and evaluated per ICC‑ES ESR‑1961, ASTM E‑standards, CCMC R13074, CAN/ULC S710.1.

Technical Data

  • Application Temperature: 40 °F–100 °F (4 °C–38 °C); humidity ≥ 20%
  • Cure Times:
    • Tack-free: ~3–10 minutes
    • Trim-ready: ~60 minutes
    • Full cure: ~8–12 hours
  • Yield: ~16–18 standard windows per 20‑oz gun can (36″×60″ window, 3/8″ gap, 1″ depth)
  • Service Temperature: Up to 240 °F (116 °C); avoid direct flame exposure
  • Shelf Life: 18 months at ~75 °F (24 °C)
  • Physical Properties (typical):
    • Compressive strength: ~3 psi (~21 kPa)
    • Density: ~1.29 pcf
    • Open-cell content: < 75%
    • Flame spread/smoke developed: 10/20–35

Recommended Applications

Ideal for sealing the perimeter between window/door frames and rough openings in residential or light commercial construction. It is suited for new installs or replacements where a controlled expansion is needed.

Common Substrates:

  • Wood (framing)
  • Vinyl window frames
  • Metal (aluminum/steel) frames
  • Composite frames
  • OSB/plywood surround
  • Brick/masonry openings
  • Drywall (interior finish)

Application Details

  • Prep: Ensure surfaces are clean, dry, and free from oil/dust.
  • Shake: Shake can vigorously for 60 seconds before use.
  • Attach: Connect can to PRO Series dispensing gun or straw; purge air.
  • Apply: Invert can, fill cavity ~50% to allow expansion; apply a slow, steady bead.
  • Cure: Tack‑free in 3–10 minutes; trim in ~60 minutes; full cure within 8–12 hours.
  • Finish: Trim, sand, paint, or stain as desired once fully cured.
  • Cleanup & Reuse: Leave can attached to the gun for up to 30 days; clean with PRO Gun Cleaner.