• All-Season Versatility: Guns and cures in ambient temperatures from -13°F to 120°F.
• High Yield: Up to 4456 linear feet per 24 oz can at ¼" bead.
• Fast Skin Time: Skins over in approximately 8 minutes.
• No Shrinkage or Post-Expansion: Ensures precise, gap-free fills.
• Excellent Adhesion: Bonds to wood, concrete, metal, masonry, and more (excluding PTFE, PE, and PP).
• Closed Cell Structure: 70–80% closed cell content for superior insulation and structural stability.
• Thermal & Acoustic Insulation: Delivers insulation value of 4.1 per inch and reduces sound transmission.
• Gun Grade Control: Precision dispensing for detailed and clean applications.
• Cures in Cold Temps: Performs where traditional foams fail.
• CFC-Free Propellant: Safe for the ozone layer and environmentally responsible.

• Base: Polyurethane
• Consistency: Stable, thixotropic foam
• Curing System: Moisture cure
• Skin Formation Time: ~8 minutes (at 68°F, 65% RH)
• Drying Time: 20–25 minutes (dust-free)
• Yield (24 oz): ~4456 linear feet at ¼” bead (ASTM C-1536)
• Shrinkage / Post-Expansion: None
• Closed Cell Content: 70–80%
• Temperature Resistance: -40°F to +194°F (fully cured)
• Color: Champagne
• Fire Class: DIN 4102 Part 2: B3
• Insulation Value: 4.1 per inch
• Compressive Strength: 4.35 psi (ASTM D-1621)
• Shear Strength: 8.70 psi (ASTM C-273)
• Tear Strength: 17.40 psi
• Water Absorption: 1% by volume
• VOC Content: < 17.9% (175 g/L)
• Shelf Life: 18 months (41°F–77°F, valve up)

• Window and door frame installation
• Insulating wall panels and cavity fills
• Sealing roof penetrations
• Filling voids around electrical outlets and piping
• Thermal barrier for refrigeration and HVAC systems
• Acoustic soundproofing layers in construction and machinery

Common Substrates:

• Wood
• Concrete
• Brick
• Stone
• Plaster
• Metal
• Most plastics (excluding PTFE, PE, and PP)

• Storage & Prep:
  • Store can upright between 41°F and 77°F.
  • Shake vigorously for at least 20 seconds before use.
• Surface Prep:
  • Ensure surfaces are clean and free of dust or oil.
  • Lightly mist surfaces with water for optimal adhesion.
• Application:
  • Use a compatible foam gun.
  • Fill cavities approximately 65% to allow for expansion.
  • For deep cavities, apply in layers and mist lightly between each layer.
  • Can temperature must be between 41°F and 95°F.
  • Product cures even in ambient temperatures up to 120°F.
• Cleanup:
  • Uncured foam: Remove with acetone or Soudal Foamcleaner.
  • Cured foam: Remove mechanically.
  • Protect cured foam from UV exposure by painting or sealing.
• Safety Notes:
  • Use only in well-ventilated areas.
  • Wear gloves and safety goggles.
  • Do not expose can to temperatures above 122°F.